This is a discussion on What do think... within the Fabia I forums, part of the Skoda Model Discussion Area category; I fitted the red led lights on the cup holder some time back but while spraying the air vent surrounds ...
| |||||||
Pronounced "bris-skoda", a brisk skoda. | Register | Gallery | FAQ | Members List | Calendar | Mark Forums Read |
| |
#1 |
| Briskodian Join Date: Aug 2005 Location: north east
Posts: 241
Members Car: Skoda Fabia Thanks: 8
Thanked 5 Times in 5 Posts
| What do think... I fitted the red led lights on the cup holder some time back but while spraying the air vent surrounds silver I had the idea of illuminating the vents not every ones cup of tea I guess but it seemed like a good idea and it would make the dash a little more interesting Anyway, they are connected to a dimmer power source so the brightness can be adjusted up and down with the rest of the dash As far as spraying the vents, I would recommend staying well clear of chrome type sprays as they don't really work well at all.... I used Vauxhall starburst silver with a lacquer finish..... looks like the gear kn*b, doesn't mark as easy as the chrome sprays ![]()
__________________ Duncan Jabba Custom Remap - 190 bhp - 340 ib/ft Torque, Sachs Uprated Clutch, Eibach Springs, Jabba Rear ARB, 312mm Zimmermann Crossdrilled Brakes, Milltek Cat Back, Seat Strut Brace, Green air filter, Seat Cupra 160 intake, Pikey mod 1, Coded Grill. |
| | |
| | #2 | |
| Skonda Fabic Join Date: Jun 2005
Posts: 4,962
Members Car: Honda Civic 2.2 i-ctdi Type S GT Thanks: 16
Thanked 20 Times in 19 Posts
| Re: What do think... Quote:
Youre right!!! ![]() | |
| | |
| | #3 |
| Briskodian Join Date: Aug 2005 Location: north east
Posts: 241
Members Car: Skoda Fabia Thanks: 8
Thanked 5 Times in 5 Posts
| Re: What do think...
__________________ Duncan Jabba Custom Remap - 190 bhp - 340 ib/ft Torque, Sachs Uprated Clutch, Eibach Springs, Jabba Rear ARB, 312mm Zimmermann Crossdrilled Brakes, Milltek Cat Back, Seat Strut Brace, Green air filter, Seat Cupra 160 intake, Pikey mod 1, Coded Grill. |
| | |
| | #4 |
| Briskodian Join Date: Jul 2006
Posts: 550
Members Car: '04 Red Fabia vRS Thanks: 24
Thanked 24 Times in 23 Posts
| Re: What do think... I like it! |
| | |
| | #5 | |
| mello in yello Join Date: Jan 2005 Location: Living in Gods own......
Posts: 6,225
Members Car: fabia vRS/ octavia vRS Thanks: 207
Thanked 231 Times in 175 Posts
| Re: What do think... That's scary, looks like your car is possessed ![]()
__________________ Quote:
Postmanpats car Fabia vRS Zennons, ESP, autochanger, 3rd headrest, heated seats, cruise control SWMBO Octy Mk2 vS maxidot, duel zone wotsit, cruise, parking sensors, 18" alloys | |
| | |
| | #6 |
| Oops! :( Join Date: Aug 2006 Location: The 2nd biggest city in the whole of England.
Posts: 3,195
Members Car: Octy II vRS Thanks: 57
Thanked 72 Times in 61 Posts
| Re: What do think... I love it! Not too sure about the cup holders, but those vents . |
| | |
| | #7 |
| Briskodian Join Date: Aug 2005 Location: north east
Posts: 241
Members Car: Skoda Fabia Thanks: 8
Thanked 5 Times in 5 Posts
| Re: What do think... Cheers..... just to say all the vents are illuminated and not just the centre ones They don't look as bright when sat at the front as well as you canot see the led's directly!
__________________ Duncan Jabba Custom Remap - 190 bhp - 340 ib/ft Torque, Sachs Uprated Clutch, Eibach Springs, Jabba Rear ARB, 312mm Zimmermann Crossdrilled Brakes, Milltek Cat Back, Seat Strut Brace, Green air filter, Seat Cupra 160 intake, Pikey mod 1, Coded Grill. Last edited by toonartist; 02-10-2006 at 21:07. |
| | |
| | #8 |
| Permanently banned Join Date: Mar 2006 Location: Buckingham Palace Car Park
Posts: 4,458
Members Car: Honda Civic Type-R Thanks: 86
Thanked 85 Times in 52 Posts
| Re: What do think... Those vent's remind me of Home Alone's basement scene...... Sorry for my twisted mind. |
| | |
| | #9 | |
| Briskodian Join Date: Aug 2005 Location: north east
Posts: 241
Members Car: Skoda Fabia Thanks: 8
Thanked 5 Times in 5 Posts
| Re: What do think... Quote:
Always knew this would be a love or hate mod but for £5, who cares..... quite like it myself and it is easy to take out without any sign of it ever being there
__________________ Duncan Jabba Custom Remap - 190 bhp - 340 ib/ft Torque, Sachs Uprated Clutch, Eibach Springs, Jabba Rear ARB, 312mm Zimmermann Crossdrilled Brakes, Milltek Cat Back, Seat Strut Brace, Green air filter, Seat Cupra 160 intake, Pikey mod 1, Coded Grill. | |
| | |
| | #10 | |
| Skonda Fabic Join Date: Jun 2005
Posts: 4,962
Members Car: Honda Civic 2.2 i-ctdi Type S GT Thanks: 16
Thanked 20 Times in 19 Posts
| Re: What do think... Quote:
Do you have a red light in your mouth too then??? ![]() | |
| | |
| | #11 |
| Briskodian Join Date: Sep 2004 Location: Leicestershire
Posts: 3,065
Members Car: Smart Roadster Coupe Brabus Thanks: 4
Thanked 19 Times in 11 Posts
| Re: What do think... Hate the cup holder, love the vent |
| | |
| | #12 | |
| Briskodian Join Date: Jan 2006 Location: The land of smoke & mirrors
Posts: 4,447
Members Car: Black Focus Thanks: 121
Thanked 100 Times in 72 Posts
| Re: What do think... Those vents look pretty cool ![]() Nice touch
__________________ ![]() Ford Focus Titanium in Panther Black Quote:
| |
| | |
| | #13 |
| Briskodian Join Date: Jul 2006 Location: Gloucester
Posts: 95
Members Car: Fabia vRS Thanks: 0
Thanked 0 Times in 0 Posts
| Re: What do think... Have to say I wasn't expecting to like any of it but those vents do look very interesting. I agree with leaving the cup holders but 10/10 on the vents.
__________________ Fabia vRS 04 |
| | |
| | #14 |
| Briskodian Join Date: Jun 2006 Location: Middlesbrough, home of legends :P (not the worst place in the UK at all...honest guv)
Posts: 3,054
Members Car: 1.4 16V Fabia Comfort Thanks: 176
Thanked 100 Times in 30 Posts
| Re: What do think... Very nice, and different too! Not sure about the red vs green going on - would be nicer in all one colour. Anywho, how do you get the vents out and wire it all up? A guide would be very much appreciated as Im loving the idea, even just to see how it looks in my car? A* anyway for bravery! Mike |
| | |
| | #15 | ||
| Briskodian Join Date: Jan 2006 Location: The land of smoke & mirrors
Posts: 4,447
Members Car: Black Focus Thanks: 121
Thanked 100 Times in 72 Posts
| Re: What do think... Quote:
I wouldn't mind seeing this in the flesh some time... might persuade me to try it as well ![]() Next on my list is replacing the interior lights with LEDs ![]()
__________________ ![]() Ford Focus Titanium in Panther Black Quote:
Last edited by Blade404; 03-10-2006 at 17:07. | ||
| | |
| | #16 |
| Briskodian Join Date: Sep 2004 Location: South Bucks
Posts: 1,217
Members Car: Fabia vRS and Impreza P1 Thanks: 16
Thanked 20 Times in 20 Posts
| Re: What do think... I think it looks like a Cylon.... Or Kitt... ![]()
__________________ Slowly turning the planet sooty. |
| | |
| | #17 | |
| Briskodian Join Date: Aug 2005 Location: north east
Posts: 241
Members Car: Skoda Fabia Thanks: 8
Thanked 5 Times in 5 Posts
| Re: What do think... Quote:
The illuminated vents idea sprang from reading the Seat Forum.... someone got on about illuminated vents.... factory fitted I would imagine.... just started me thinking on what it would look like on the vrs ![]()
__________________ Duncan Jabba Custom Remap - 190 bhp - 340 ib/ft Torque, Sachs Uprated Clutch, Eibach Springs, Jabba Rear ARB, 312mm Zimmermann Crossdrilled Brakes, Milltek Cat Back, Seat Strut Brace, Green air filter, Seat Cupra 160 intake, Pikey mod 1, Coded Grill. | |
| | |
| | #18 |
| Briskodian | Re: What do think... |
| | |
| | #19 |
| Sorted by U18 Join Date: Jul 2006 Location: Norfolk/East Anglia
Posts: 554
Thanks: 10
Thanked 33 Times in 32 Posts
| Re: What do think... i wouldn't have it myself, but 10/10 for the execution. |
| | |
| | #20 | |
| Briskodian Join Date: Aug 2005 Location: north east
Posts: 241
Members Car: Skoda Fabia Thanks: 8
Thanked 5 Times in 5 Posts
| Re: What do think... Quote:
Cheers.... As it only cost a fiver and is easy to return to standard, it was always worth a go The vents can be levered out using a flat bladed screwdriver with a bit of cloth wrapped around the end so it doesn't scratch the dash! Anyone wanting to spray the vents silver, now’s the time to do it Once the vent is out the facia can be removed from the vent, you will spot where the facia clips on to vent. Use the screwdriver again to remove it gently. Watch out when you do remove the facia as the wheel that operates the vertical direction can spring apart if you are not careful. There is a little spring in the wheel that can ping out if you knock it around to much easy to put back together though if it does happen The lights are fitted to the underside of the vent. Drill a hole (or use an old soldering iron) to make the correct size hole for the led to clip in to. Best to get the size right so you don’t need to use glue so it can be easily removed if you decide to take it out! (I used the soldering iron, easier to control without knacking the vent). The positive came from the dimmer power cable that is available on the back of the radio.... if you take a look at VRS Stu's website it has the cabling diagram for the radio, you can use special clips to tap in to the earth and power wires. The centre vents are easy to reach but the side vents are a little harder. Left vent, remove the glove box and the side panel (like the fuse box cover but on the passengers side). You will see a small whole in the left hand side of the vent fed the lose wire through this and leave the led hanging out from the vent. From there, feed the wire so it runs above where the glove box would be and straight to the centre console. The same goes for the right hand vent. It proved handy to have an old wire coat hanger cut up and straightened out so you can use it to feed the cable from the right hand vent to the centre console. Saved time having to remove to much of the dash between the steering wheel and the peddles etc. I find it best to run a wire from the power source and earth cable and then connect each of you LED’s to these new cables. This saves mucking around to much with the original cabling. Again, VRS Stu’s web site explains this excellently. Once all the cables are in place and you have re-attached the facia to the vent (if you painted it) attach the led's into the small holes created in each vent and ease it back into the dash.....and that's it, not a big job really and it costs £4.99 for the LED’s from Halfords and a couple of quid for the connectors Just be careful with the wiring and if you are not sure as to how to wire them in, get someone who does!
__________________ Duncan Jabba Custom Remap - 190 bhp - 340 ib/ft Torque, Sachs Uprated Clutch, Eibach Springs, Jabba Rear ARB, 312mm Zimmermann Crossdrilled Brakes, Milltek Cat Back, Seat Strut Brace, Green air filter, Seat Cupra 160 intake, Pikey mod 1, Coded Grill. Last edited by toonartist; 03-10-2006 at 19:51. | |
| | |
| | #21 |
| Briskodian Join Date: Aug 2005 Location: north east
Posts: 241
Members Car: Skoda Fabia Thanks: 8
Thanked 5 Times in 5 Posts
| Re: What do think... ![]() would have been easier to buy a long straw Seen a copule of photo's from people on here that have done the same thing but with blue led's.
__________________ Duncan Jabba Custom Remap - 190 bhp - 340 ib/ft Torque, Sachs Uprated Clutch, Eibach Springs, Jabba Rear ARB, 312mm Zimmermann Crossdrilled Brakes, Milltek Cat Back, Seat Strut Brace, Green air filter, Seat Cupra 160 intake, Pikey mod 1, Coded Grill. |
| | |
| | #23 |
| Briskodian Join Date: Jan 2005 Location: United Arab Emirates
Posts: 3,807
Thanks: 0
Thanked 5 Times in 5 Posts
| Re: What do think... Looks hot dude. Nice mod.
__________________ Milton Kyvernitis Private Government |
| | |