Help
Posted by
fluffmeister 
Last week I stripped out some parts from the MX-5 and took them with me to work and while I was in the hotel at night I carbon wrapped them.
I just used the hotel hairdryer, and a craft knife with a little patience. The results are pretty good imho. I sanded all the components with some P1600 wet and dry first to give the film something to key into to as the dash had been cleaned / dressed with silocone based cleaner in the past.
This week I am doing the vent surrounds and some other bit's and pieces.
Pics taken with the mobile phone so not to good, sorry.
[IMG]http://i4.photobucket.com/albums/y115/fluffmeister/IMAG0004.jpg[/IMG]
[IMG]http://i4.photobucket.com/albums/y115/fluffmeister/IMAG0013.jpg[/IMG]
[IMG]http://i4.photobucket.com/albums/y115/fluffmeister/IMAG0012.jpg[/IMG]
I just used the hotel hairdryer, and a craft knife with a little patience. The results are pretty good imho. I sanded all the components with some P1600 wet and dry first to give the film something to key into to as the dash had been cleaned / dressed with silocone based cleaner in the past.
This week I am doing the vent surrounds and some other bit's and pieces.
Pics taken with the mobile phone so not to good, sorry.
[IMG]http://i4.photobucket.com/albums/y115/fluffmeister/IMAG0004.jpg[/IMG]
[IMG]http://i4.photobucket.com/albums/y115/fluffmeister/IMAG0013.jpg[/IMG]
[IMG]http://i4.photobucket.com/albums/y115/fluffmeister/IMAG0012.jpg[/IMG]
Tags: Di-Noc Carbon Wrap
Share This Entry:
Wardy likes this
5 Comments On This Entry
Page 1 of 1
Trackbacks for this entry [ Trackback URL ]
← February 2012 →
| S | M | T | W | T | F | S |
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | |||
| 5 | 6 | 7 | 8 | 9 | 10 | 11 |
| 12 | 13 | 14 | 15 | 16 | 17 | 18 |
| 19 | 20 | 21 | 22 | 23 | 24 | 25 |
| 26 | 27 | 28 | 29 |
Recent Entries
-
3m Carbon Wrap on the MX-5 gear lever surround and dash trimon Aug 02 2010 14:22
-
Looks good Tony
With the offcut's I did the Prius key and my external hard disk
Lookin good there Tony, the octy dash should be a doddle next to that as it's just square cut-outs for the most part innit. I'll rip the bits out sometime over the next few days hopefully.
SideshowBob, on 05 August 2010 - 22:36, said:
Lookin good there Tony, the octy dash should be a doddle next to that as it's just square cut-outs for the most part innit. I'll rip the bits out sometime over the next few days hopefully.
No worries Neilo, just drop it round and I will do it for you mate. Fancy looking after the KTM for me for 3 weeks while I am away on holiday?
When you mention using the hotel hairdryer, why do I get visions of an Alan Partridge sketch with a Corby trouser press?!