VAG COM Newbie - Shropshire

jos · 17-05-2006, 10:52

Well I installed the software and connected my freshly purchased cable to the laptop & car, switched it on, configured the port, tested it, searched for error codes, and there was only 1. Boo hoo sob sob. I was wanting the coil pack error code to show up.

I guess I'm sad wanting error codes to show up and being cross that they didnt. Ah well I guess it means that i need my MAF (te he, not MUFF) looking at, and throttle body plenum looking at both jobs I much rather a garage did for me.

If anybody needs VAG COM in Shropshire or surrounding area then give me a shout and hopefully we'll be able to hook up.

Goochie · 17-05-2006, 10:54

Out of interest, what was the error code and fault description given by VAG-COM ?

***DGW*** · 17-05-2006, 10:56

A good bit of kit, isn't it?!

Please add your details to the thread here.

jos · 17-05-2006, 11:34

It was the standard 17978 engine start blocked by immobiliser

I take it that this means that the engines not running which is absoloutely right - but nothing to worry about

I have added my details too.

Goochie · 17-05-2006, 11:40

Thats not really what it means. Even if the engine is not running when you search for fault codes there will be none on a "clean" engine.

Obviously at some point in the past, someone has tried to start the car with the key in the ignition but the imobiliser has prevented it from starting. Nothing to worry about.

If that is the only fault code you have, why are you considering looking at the MAF etc.? A faulty MAF would normally log a code for the engine running too lean or too rich. A throttle body error would have a similar fault logged.

Dr Zoidberg · 17-05-2006, 11:46

Quote:

Originally Posted by jos

Well I installed the software and connected my freshly purchased cable to the laptop & car, switched it on, configured the port, tested it, searched for error codes, and there was only 1. Boo hoo sob sob. I was wanting the coil pack error code to show up.

Glad you have it all working ok

jos · 17-05-2006, 11:49

I'm experience un even power delivery and believe it to be attributed to one of three things,

lazy MAF, clogged plenum, or coil packs. As Ive now eliminated coil packs (even though I know theyre the wrong type) as far as I can from the equation, I'm happy to give her to the pros for further investigation

jos · 17-05-2006, 11:50

I dont believe they are faults or errors that would log a fault, i think the maf is just lazy and the plenum needs cleaning

jos · 16-06-2006, 14:13

Well the garage has just given her back to me having had the 17978 code remedied. They say my jolting power should be cleared now. We'll see.

Got antihijacking activated too now, although it doesnt auto unlock - will try and get that sorted

***DGW*** · 16-06-2006, 14:47

AUTO-LOCK is Channel 3 and AUTO-UNLOCK is Channel 4 in 46 - CENTRAL CONV - ADAPTATION - 10. Takes seconds to change.

vRSLen · 16-06-2006, 14:58

Quote:

Originally Posted by DGW

AUTO-LOCK is Channel 3 and AUTO-UNLOCK is Channel 4 in 46 - CENTRAL CONV - ADAPTATION - 10. Takes seconds to change.

heliflyer · 18-06-2006, 15:48

It might be stupid but were is the socket to plug in Vag-com or similar equipment,I have a fault light showing on the engine management It might be stupid but were is the socket to plug in Vag-com or similar equipment,FABIA SALOON I have a fault light showing on the engine management system a friend said he may be able to read it and reset with some snap-on unit which may or may not work,If not looks like buying a laptop,a lead and downloading Vag-com shareware

bbrbob · 20-06-2006, 12:57

In my PD100 (well PD135 now really) estate it is behind the little glove compartment next to your right knee. Give it a wiggle and a tug and you can see the socket easily. It's the one with the pen holder thingy in it. Bob.

**roo** · 20-06-2006, 18:39

Quote:

Originally Posted by vRSLen

it's the location where you will find the anti-hijack settings (auto lock/unlock)

heliflyer · 20-06-2006, 18:48

I found the socket near the right knee behind the small storage thingy,
Thanks all.

17-05-2006, 10:52	#1
jos Briskodian Join Date: Mar 2006 Location: Telford, Shropshire Posts: 54 Members Car: Thanks: 0 Thanked 0 Times in 0 Posts	VAG COM Newbie - Shropshire Well I installed the software and connected my freshly purchased cable to the laptop & car, switched it on, configured the port, tested it, searched for error codes, and there was only 1. Boo hoo sob sob. I was wanting the coil pack error code to show up. I guess I'm sad wanting error codes to show up and being cross that they didnt. Ah well I guess it means that i need my MAF (te he, not MUFF) looking at, and throttle body plenum looking at both jobs I much rather a garage did for me. If anybody needs VAG COM in Shropshire or surrounding area then give me a shout and hopefully we'll be able to hook up.

17-05-2006, 10:54	#2
Goochie Briskodian Join Date: Jan 2004 Location: Up a tree. Posts: 12,363 Members Car: Thanks: 7 Thanked 27 Times in 25 Posts	Re: VAG COM Newbie - Shropshire Out of interest, what was the error code and fault description given by VAG-COM ?

17-05-2006, 10:56	#3
*DGW* BRISKODA Staff Join Date: Oct 2002 Location: Cambridgeshire Posts: 17,299 Members Car: Octavia 1.8T 4X4 Estate & Fabia vRS Thanks: 51 Thanked 207 Times in 156 Posts	Re: VAG COM Newbie - Shropshire A good bit of kit, isn't it?! Please add your details to the thread here. __________________ Denis 2002 Octavia 1.8T 4X4 turbo Estate - rebreathed on by Jabba ... 31.93mpg 2007 Fabia vRS - CC, ESP and full leather trim by Seat Surgeons ...48.57 mpg...

17-05-2006, 11:34	#4
jos Briskodian Join Date: Mar 2006 Location: Telford, Shropshire Posts: 54 Members Car: Thanks: 0 Thanked 0 Times in 0 Posts	Re: VAG COM Newbie - Shropshire It was the standard 17978 engine start blocked by immobiliser I take it that this means that the engines not running which is absoloutely right - but nothing to worry about I have added my details too.

17-05-2006, 11:40	#5
Goochie Briskodian Join Date: Jan 2004 Location: Up a tree. Posts: 12,363 Members Car: Thanks: 7 Thanked 27 Times in 25 Posts	Re: VAG COM Newbie - Shropshire Thats not really what it means. Even if the engine is not running when you search for fault codes there will be none on a "clean" engine. Obviously at some point in the past, someone has tried to start the car with the key in the ignition but the imobiliser has prevented it from starting. Nothing to worry about. If that is the only fault code you have, why are you considering looking at the MAF etc.? A faulty MAF would normally log a code for the engine running too lean or too rich. A throttle body error would have a similar fault logged. Last edited by Goochie; 17-05-2006 at 11:41.

17-05-2006, 11:49	#7
jos Briskodian Join Date: Mar 2006 Location: Telford, Shropshire Posts: 54 Members Car: Thanks: 0 Thanked 0 Times in 0 Posts	Re: VAG COM Newbie - Shropshire I'm experience un even power delivery and believe it to be attributed to one of three things, lazy MAF, clogged plenum, or coil packs. As Ive now eliminated coil packs (even though I know theyre the wrong type) as far as I can from the equation, I'm happy to give her to the pros for further investigation

17-05-2006, 11:50	#8
jos Briskodian Join Date: Mar 2006 Location: Telford, Shropshire Posts: 54 Members Car: Thanks: 0 Thanked 0 Times in 0 Posts	Re: VAG COM Newbie - Shropshire I dont believe they are faults or errors that would log a fault, i think the maf is just lazy and the plenum needs cleaning

16-06-2006, 14:13	#9
jos Briskodian Join Date: Mar 2006 Location: Telford, Shropshire Posts: 54 Members Car: Thanks: 0 Thanked 0 Times in 0 Posts	Re: VAG COM Newbie - Shropshire Well the garage has just given her back to me having had the 17978 code remedied. They say my jolting power should be cleared now. We'll see. Got antihijacking activated too now, although it doesnt auto unlock - will try and get that sorted

16-06-2006, 14:47	#10
*DGW* BRISKODA Staff Join Date: Oct 2002 Location: Cambridgeshire Posts: 17,299 Members Car: Octavia 1.8T 4X4 Estate & Fabia vRS Thanks: 51 Thanked 207 Times in 156 Posts	Re: VAG COM Newbie - Shropshire AUTO-LOCK is Channel 3 and AUTO-UNLOCK is Channel 4 in 46 - CENTRAL CONV - ADAPTATION - 10. Takes seconds to change. __________________ Denis 2002 Octavia 1.8T 4X4 turbo Estate - rebreathed on by Jabba ... 31.93mpg 2007 Fabia vRS - CC, ESP and full leather trim by Seat Surgeons ...48.57 mpg...

18-06-2006, 15:48	#12
heliflyer Briskodian Join Date: Jun 2006 Location: Wolverhampton Posts: 7 Members Car: Fabia 1.4 16v saloon Thanks: 0 Thanked 0 Times in 0 Posts	:HELP VAG-COM Newbie - WEST.MIDS It might be stupid but were is the socket to plug in Vag-com or similar equipment,I have a fault light showing on the engine management It might be stupid but were is the socket to plug in Vag-com or similar equipment,FABIA SALOON I have a fault light showing on the engine management system a friend said he may be able to read it and reset with some snap-on unit which may or may not work,If not looks like buying a laptop,a lead and downloading Vag-com shareware

20-06-2006, 12:57	#13
bbrbob Briskodian Join Date: Mar 2006 Posts: 19 Members Car: Thanks: 0 Thanked 0 Times in 0 Posts	Re: :HELP VAG-COM Newbie - WEST.MIDS In my PD100 (well PD135 now really) estate it is behind the little glove compartment next to your right knee. Give it a wiggle and a tug and you can see the socket easily. It's the one with the pen holder thingy in it. Bob. Last edited by bbrbob; 20-06-2006 at 12:58.

20-06-2006, 18:48	#15
heliflyer Briskodian Join Date: Jun 2006 Location: Wolverhampton Posts: 7 Members Car: Fabia 1.4 16v saloon Thanks: 0 Thanked 0 Times in 0 Posts	Re: VAG COM Newbie - Shropshire I found the socket near the right knee behind the small storage thingy, Thanks all.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode