Boost leak, help with part number please.

martziniuk · 08-05-2008, 20:17

Have got a boost leak which i heard and later found today.
I need help with a pipe part number please.
The pipe is joined to another by a wrap around sleeve and is one of 2 pipes which comes from the middle of the inlet manifold.
I have included a bad pic of the offending pipe ( there is another pipe to the left which is not pictured which i don't want). I have checked ETKA but it is only showing 1 pipe leaving the middle of the manifold but mine has 2 from the middle.
Thanks

mattbeef · 08-05-2008, 20:31

Err pass mate as mine only has one pipe from the mani

martziniuk · 08-05-2008, 21:04

New pic its the right pipe

***Neo_VR*** · 08-05-2008, 21:10

Part number i got was 06a103221bk - i replaced this last week.

piv34uk · 08-05-2008, 21:10

If its the one on the right hand side of the inlet then i have just replaced mine... 06A103221BK mine cost £9.73 +vat. If that has gone i would also change the Y shaped one off the rocker box S06A103221BH £22.84 +vat
HTH
Phil

martziniuk · 08-05-2008, 21:38

Thanks, can you tell me if it came with the other pipe, there is a sleeve which wraps them both together.
So is the pipe a crankcase breather or something to do with the inlet manifold?

piv34uk · 08-05-2008, 21:55

No... Just one on its own, mine had an inch long cut in it... Wasnt the end of my problems though as the Maf decided to go pop
Phil

martziniuk · 08-05-2008, 21:57

snap, an inch is spot on.

***Neo_VR*** · 08-05-2008, 21:59

Quote:

Originally Posted by martziniuk

Thanks, can you tell me if it came with the other pipe, there is a sleeve which wraps them both together.
So is the pipe a crankcase breather or something to do with the inlet manifold?

Its something to do with emissions/breathers but it lets air in at idle so on mine it ran ****e when cold and would drop into limp mode too..

Dont forget you will need new jublee clips for it too.. either order from dealers at same time or get some from halfords..
I managed to DIY it after unbolting that black metal plate thing and pushing it out the way.

martziniuk · 08-05-2008, 22:02

Quote:

Originally Posted by Neo_VR

Its something to do with emissions/breathers but it lets air in at idle so on mine it ran ****e when cold and would drop into limp mode too..

Dont forget you will need new jublee clips for it too.. either order from dealers at same time or get some from halfords..
I managed to DIY it after unbolting that black metal plate thing and pushing it out the way.

Yeah clips are sorted, i will acquire some from work

I had the black plate to the side tonight thats how i found it. Come to think of it i have been getting a smell of oil in the cabin on idle. Think i found the cause.

goodridge · 08-05-2008, 23:50

Sorry to hi-jack the thread but could this be the problem with my brother VRS also? Sometimes its fine with full performance and sometimes its flat, with no boost. Following advice on another thread I've replaced the turbo outlet pipe for the modified one, cleaned the throttle body, replaced the DV for a 710n. But the problem is still there?

piv34uk · 09-05-2008, 08:04

Vag-com will give you the answer, but a possible thing could be the N75 valve if your not getting boost
Phil

***Neo_VR*** · 09-05-2008, 11:47

Quote:

Originally Posted by goodridge

Sorry to hi-jack the thread but could this be the problem with my brother VRS also? Sometimes its fine with full performance and sometimes its flat, with no boost. Following advice on another thread I've replaced the turbo outlet pipe for the modified one, cleaned the throttle body, replaced the DV for a 710n. But the problem is still there?

Could possibly be...
telltale signs are oily residue and crap round the dipstick area (ooo err missus) and if you can get your hand down there when the engines running and wiggle the pipes you may be able to hear a difference in noise. i noticed mine from a definate hissing that could be heard at idle, wiggling the pipes made the noise change a bit

See this thread for more info

martziniuk · 09-05-2008, 12:14

Got mine ordered today, should be in tomorrow. Audi price £10.81 +vat .... jizzing sods.
For reference I never got any fault codes.

V666 VRS · 09-05-2008, 19:44

Quote:

Originally Posted by goodridge

Sorry to hi-jack the thread but could this be the problem with my brother VRS also? Sometimes its fine with full performance and sometimes its flat, with no boost. Following advice on another thread I've replaced the turbo outlet pipe for the modified one, cleaned the throttle body, replaced the DV for a 710n. But the problem is still there?

Has the car been remapped at all and has the car got any fault codes showing? I'm assuming you have VAG com.

Darren

goodridge · 11-05-2008, 14:43

No its a stock car, it has the infamous (so it seems) 17705 pressure drop fault code. I had access to VAG-COM. However my own full version should be here tomorrow

08-05-2008, 20:17	#1
martziniuk Need more power Join Date: Feb 2007 Location: Driffield, Good old yorkshire Posts: 1,567 Thanks: 29 Thanked 105 Times in 105 Posts	Boost leak, help with part number please. Have got a boost leak which i heard and later found today. I need help with a pipe part number please. The pipe is joined to another by a wrap around sleeve and is one of 2 pipes which comes from the middle of the inlet manifold. I have included a bad pic of the offending pipe ( there is another pipe to the left which is not pictured which i don't want). I have checked ETKA but it is only showing 1 pipe leaving the middle of the manifold but mine has 2 from the middle. Thanks __________________ Regards Martin Turbo back blueflame exhaust ,Forge FMDV006 Dump valve, Autobahn88 TIP, CAI ,Remapped, FMIC soon..... SCN rolling road day 216.8bhp 264ft/lb (Dyno Dynamics)

08-05-2008, 20:31	#2
mattbeef Needs Money Join Date: Apr 2006 Location: Sheffield Posts: 3,301 Thanks: 37 Thanked 112 Times in 111 Posts	Re: Boost leak, help with part number please. Err pass mate as mine only has one pipe from the mani __________________ I few bits here and there but im happy to Performance Torque Go on click me you know you want to

08-05-2008, 21:04	#3
martziniuk Need more power Join Date: Feb 2007 Location: Driffield, Good old yorkshire Posts: 1,567 Thanks: 29 Thanked 105 Times in 105 Posts	Re: Boost leak, help with part number please. New pic its the right pipe __________________ Regards Martin Turbo back blueflame exhaust ,Forge FMDV006 Dump valve, Autobahn88 TIP, CAI ,Remapped, FMIC soon..... SCN rolling road day 216.8bhp 264ft/lb (Dyno Dynamics)

08-05-2008, 21:10	#4
*Neo_VR* UberMod™ Join Date: Feb 2003 Location: Manchester Posts: 11,773 Thanks: 58 Thanked 145 Times in 105 Posts	Re: Boost leak, help with part number please. Part number i got was 06a103221bk - i replaced this last week. __________________ ColGod the UberMod VXR, Gti, ST, vRS... An MPS fears not these things...

08-05-2008, 21:10	#5
piv34uk NOW @ PEUGEOT Join Date: Nov 2003 Location: Bicester,Oxfordshire Posts: 1,385 Thanks: 28 Thanked 34 Times in 33 Posts	Re: Boost leak, help with part number please. If its the one on the right hand side of the inlet then i have just replaced mine... 06A103221BK mine cost £9.73 +vat. If that has gone i would also change the Y shaped one off the rocker box S06A103221BH £22.84 +vat HTH Phil __________________ 1)RED ONE, FEW MODS; AND A HEALTHY 240+ 2)BLACK ONE, LOADSA MODS; AND A HEALTHY 360+ DaveU`s old bus LACK OF PLANNING ON YOUR BEHALF DOES NOT CONSTITUTE AN EMERGENCY ON MINE

08-05-2008, 21:38	#6
martziniuk Need more power Join Date: Feb 2007 Location: Driffield, Good old yorkshire Posts: 1,567 Thanks: 29 Thanked 105 Times in 105 Posts	Re: Boost leak, help with part number please. Thanks, can you tell me if it came with the other pipe, there is a sleeve which wraps them both together. So is the pipe a crankcase breather or something to do with the inlet manifold? __________________ Regards Martin Turbo back blueflame exhaust ,Forge FMDV006 Dump valve, Autobahn88 TIP, CAI ,Remapped, FMIC soon..... SCN rolling road day 216.8bhp 264ft/lb (Dyno Dynamics) Last edited by martziniuk; 08-05-2008 at 21:56.

08-05-2008, 21:55	#7
piv34uk NOW @ PEUGEOT Join Date: Nov 2003 Location: Bicester,Oxfordshire Posts: 1,385 Thanks: 28 Thanked 34 Times in 33 Posts	Re: Boost leak, help with part number please. No... Just one on its own, mine had an inch long cut in it... Wasnt the end of my problems though as the Maf decided to go pop Phil __________________ 1)RED ONE, FEW MODS; AND A HEALTHY 240+ 2)BLACK ONE, LOADSA MODS; AND A HEALTHY 360+ DaveU`s old bus LACK OF PLANNING ON YOUR BEHALF DOES NOT CONSTITUTE AN EMERGENCY ON MINE

08-05-2008, 21:57	#8
martziniuk Need more power Join Date: Feb 2007 Location: Driffield, Good old yorkshire Posts: 1,567 Thanks: 29 Thanked 105 Times in 105 Posts	Re: Boost leak, help with part number please. snap, an inch is spot on. __________________ Regards Martin Turbo back blueflame exhaust ,Forge FMDV006 Dump valve, Autobahn88 TIP, CAI ,Remapped, FMIC soon..... SCN rolling road day 216.8bhp 264ft/lb (Dyno Dynamics)

08-05-2008, 23:50	#11
goodridge Briskodian Join Date: May 2004 Posts: 30 Thanks: 0 Thanked 3 Times in 3 Posts	Re: Boost leak, help with part number please. Sorry to hi-jack the thread but could this be the problem with my brother VRS also? Sometimes its fine with full performance and sometimes its flat, with no boost. Following advice on another thread I've replaced the turbo outlet pipe for the modified one, cleaned the throttle body, replaced the DV for a 710n. But the problem is still there?

09-05-2008, 08:04	#12
piv34uk NOW @ PEUGEOT Join Date: Nov 2003 Location: Bicester,Oxfordshire Posts: 1,385 Thanks: 28 Thanked 34 Times in 33 Posts	Re: Boost leak, help with part number please. Vag-com will give you the answer, but a possible thing could be the N75 valve if your not getting boost Phil __________________ 1)RED ONE, FEW MODS; AND A HEALTHY 240+ 2)BLACK ONE, LOADSA MODS; AND A HEALTHY 360+ DaveU`s old bus LACK OF PLANNING ON YOUR BEHALF DOES NOT CONSTITUTE AN EMERGENCY ON MINE

09-05-2008, 12:14	#14
martziniuk Need more power Join Date: Feb 2007 Location: Driffield, Good old yorkshire Posts: 1,567 Thanks: 29 Thanked 105 Times in 105 Posts	Re: Boost leak, help with part number please. Got mine ordered today, should be in tomorrow. Audi price £10.81 +vat .... jizzing sods. For reference I never got any fault codes. __________________ Regards Martin Turbo back blueflame exhaust ,Forge FMDV006 Dump valve, Autobahn88 TIP, CAI ,Remapped, FMIC soon..... SCN rolling road day 216.8bhp 264ft/lb (Dyno Dynamics) Last edited by martziniuk; 09-05-2008 at 20:20.

11-05-2008, 14:43	#16
goodridge Briskodian Join Date: May 2004 Posts: 30 Thanks: 0 Thanked 3 Times in 3 Posts	Re: Boost leak, help with part number please. No its a stock car, it has the infamous (so it seems) 17705 pressure drop fault code. I had access to VAG-COM. However my own full version should be here tomorrow

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode