This is a discussion on Heater Control Illumination within the Octavia I forums, part of the Skoda Model Discussion Area category; My heater control panel has no illumination at all on either the panel itself or any of the switches. How ...
| |||||||
Pronounced "bris-skoda", a brisk skoda. | Register | FAQ | Members List | Calendar | Mark Forums Read |
| | #1 |
| Briskodian Join Date: May 2007 Location: .
Posts: 381
Thanks: 3
Thanked 26 Times in 18 Posts
| My heater control panel has no illumination at all on either the panel itself or any of the switches. How easy is it to change the bulbs on these? It's a '53 reg estate in Ambiente trim with Air Con. Thanks in advance. |
| | |
| | #2 |
| BRISKODA Staff Join Date: Nov 2002 Location: Stevenage Herts.
Posts: 10,658
Thanks: 23
Thanked 246 Times in 232 Posts
| The trim around the controls just pulls off, remove by opening the ashtray and grasping the bottom of the trim and pull towards you. IIRC the controls are held in place using torx screws, and the bulbs are accessed from behind.
__________________ Manny 2005 Octavia 2.0TDi Elegance combi my skoda website http://www.octaviars.co.uk Join the briskoda.net folding team click Here for more info |
| | |
| | #3 |
| ECUless Join Date: Mar 2005
Posts: 1,823
Thanks: 28
Thanked 202 Times in 176 Posts
| Pull the fan rotary control off, a pair of pliers and cardboard packing for protection will do the job. You will see the bulb, pull it out by putting a plastic pipe on it or use long nosed pliers but don't break the glass. |
| | |
BRISKODA.net is operated by Summit 360 Ltd