The old hesitation after remap problem

martziniuk · 09-11-2007, 12:57

I know this problem has been covered a thousand times but i have not found a definte answer yet.
Got my car back yesterday after a remap and have noticed a hestitation most noticable in forth and fifth. The car seems to hold back then surge then hold back again before returning to normal.This happens when i floor it and it picks up through the rev range, it has started since the remap.
There are no fault codes and on the whole the car seems loads faster.
There is just this slight problem.
I would prefer to keep the car as close to standard as poss with regards to dv's, anyone with any ideas?
Thanks

Octavia Vrs! · 09-11-2007, 13:40

It could be a split diaphram on the dumpvalve. Its a good idea to upgrade to a bailey or forge type dump valve even on a standard car. The extra boost can make them fail on the way home after a remap.
Im no expert but id change it anyway because its bound to fail soon anyway!

Liverpool-Lad · 09-11-2007, 15:20

For info my standard DV has been on since remap earlier on in the year with no issues.

martziniuk · 09-11-2007, 19:33

Cheers chaps,
So is there a way to replace standard dv but with keeping genuine parts in mind?
Also with my car having a 2.5" turbo back exhaust do you think this would affect the boost more than standard?

Liverpool-Lad · 09-11-2007, 19:54

There is no genuine part, only the same stuff you already have on there.

martziniuk · 09-11-2007, 20:01

Quote:

Originally Posted by Liverpool-Lad

There is no genuine part, only the same stuff you already have on there.

Superted · 09-11-2007, 20:59

Quote:

Originally Posted by martziniuk

Cheers chaps,
So is there a way to replace standard dv but with keeping genuine parts in mind?
Also with my car having a 2.5" turbo back exhaust do you think this would affect the boost more than standard?

Have a look on the US MKV forum, understand you have a MKI Octy but you may be interested to know that the TFSI engine has similar issues..........they also link to MKIV forums so will be worth a look..

VW GTI Forum / VW Rabbit Forum / VW R32 Forum / VW Golf Forum - Golfmkv.com - Powered by vBulletin

Hope this helps.....

martziniuk · 09-11-2007, 21:04

cheers buddy

Big__Lad · 09-11-2007, 21:22

Yes check you DV and replace e.g forge 007P. something i have on mines

Superted · 09-11-2007, 21:44

Quote:

Originally Posted by Big__Lad

Yes check you DV and replace e.g forge 007P. something i have on mines

I can pretty much say it's not DV issues.......

martziniuk · 09-11-2007, 22:47

What would you hint at the issue being mr superted?

bengie · 09-11-2007, 23:38

er, its lag.

martziniuk · 09-11-2007, 23:54

I don't think its turbo lag, because it accelerates, then slows, then goes again, almost as if it thinks i'm going to boot it, then decides i didn't want to after all.
isn't Turbo lag the time spent waiting for the turbo to spool up after you boot it?

bengie · 10-11-2007, 00:26

thats what i thought you were talking about.

martziniuk · 10-11-2007, 00:30

Having searched and searched i think the general idea is you need to replace the standard Dv with an uprated one to cope with the excess pressure.
Many mapping companies seem to recommend replacing the DV when you have the car remapped too as the standard cannot cope with the extra turbo pressure.
Would it sound right that the old standard diaphragm Dv i have maybe fluttering/struggling a bit when i change gear causing the hesitation/surge?

martziniuk · 10-11-2007, 00:31

Quote:

Originally Posted by bengie

thats what i thought you were talking about.

Nope there is a big initial boost followed very quickly by a drop then back on boost.This all happens very quickly

musky · 10-11-2007, 09:05

I thought the hesitating thing was a before remap thing not after, it cured mine when it was done. And nothing else was replaced.

christaylor · 10-11-2007, 10:13

I have this same problem with my car and am not sure what it is. Mine isn't remapped though. It happens mainly in second gear say I put my foot down from 40 - 70 mph the turbo kicks in then seems to backs off about 2-3 times it all happens very quickly

dewaryboy · 10-11-2007, 11:57

i had the same fault after my octy vrs was remapped,i already had an uprated dv on mine,i have done away with my n249 valve,its still connected electrically to keep ecu happy,but i have re routed vacum pipes to bypass,its not cured the hesistation completely but its loads better,plus the dv reacts a lot quicker,people will tell u not to bypass it,with the n249 in place the ecu has the option if it senses too much boost to open the dv will on throttle,but it can cause the problems ur having.

Superted · 11-11-2007, 10:49

Quote:

Originally Posted by martziniuk

What would you hint at the issue being mr superted?

Have a look here, this issue has been covered on US MKV and MKIV forums and the link here is for a fuel pump upgrade.

In my opinion it is this that is causing the issue here, especially after remap. My opinion for what it is worth.

BSH is now taking pre orders on the Autotech Fuel Pump - VW GTI Forum / VW Rabbit Forum / VW R32 Forum / VW Golf Forum - Golfmkv.com

09-11-2007, 12:57	#1
martziniuk Need more power Join Date: Feb 2007 Location: Driffield, Good old yorkshire Posts: 1,613 Thanks: 31 Thanked 108 Times in 108 Posts	The old hesitation after remap problem I know this problem has been covered a thousand times but i have not found a definte answer yet. Got my car back yesterday after a remap and have noticed a hestitation most noticable in forth and fifth. The car seems to hold back then surge then hold back again before returning to normal.This happens when i floor it and it picks up through the rev range, it has started since the remap. There are no fault codes and on the whole the car seems loads faster. There is just this slight problem. I would prefer to keep the car as close to standard as poss with regards to dv's, anyone with any ideas? Thanks __________________ Regards Martin Turbo back blueflame exhaust ,Forge FMDV006 Dump valve, Autobahn88 TIP, CAI ,Remapped, FMIC soon..... SCN rolling road day 216.8bhp 264ft/lb (Dyno Dynamics)

09-11-2007, 13:40	#2
Octavia Vrs! Briskodian Join Date: Apr 2006 Posts: 378 Thanks: 20 Thanked 24 Times in 23 Posts	Re: The old hesitation after remap problem It could be a split diaphram on the dumpvalve. Its a good idea to upgrade to a bailey or forge type dump valve even on a standard car. The extra boost can make them fail on the way home after a remap. Im no expert but id change it anyway because its bound to fail soon anyway! __________________ There's nothing like seeing feathers going in the opposite direction to the bird! .......................................

09-11-2007, 15:20	#3
Liverpool-Lad Briskodian Join Date: Aug 2006 Location: Liverpool Posts: 1,612 Thanks: 12 Thanked 44 Times in 44 Posts	Re: The old hesitation after remap problem For info my standard DV has been on since remap earlier on in the year with no issues. __________________ 2001 Rally Red Octavia vRS...remap complete Whiteline rear ARB, Superpro dogbone bush - 225/45/17 Goodyear Eagle F1 Aysmmetrics and lots of V-Power! Smiles all 'round

09-11-2007, 19:33	#4
martziniuk Need more power Join Date: Feb 2007 Location: Driffield, Good old yorkshire Posts: 1,613 Thanks: 31 Thanked 108 Times in 108 Posts	Re: The old hesitation after remap problem Cheers chaps, So is there a way to replace standard dv but with keeping genuine parts in mind? Also with my car having a 2.5" turbo back exhaust do you think this would affect the boost more than standard? __________________ Regards Martin Turbo back blueflame exhaust ,Forge FMDV006 Dump valve, Autobahn88 TIP, CAI ,Remapped, FMIC soon..... SCN rolling road day 216.8bhp 264ft/lb (Dyno Dynamics)

09-11-2007, 19:54	#5
Liverpool-Lad Briskodian Join Date: Aug 2006 Location: Liverpool Posts: 1,612 Thanks: 12 Thanked 44 Times in 44 Posts	Re: The old hesitation after remap problem There is no genuine part, only the same stuff you already have on there. __________________ 2001 Rally Red Octavia vRS...remap complete Whiteline rear ARB, Superpro dogbone bush - 225/45/17 Goodyear Eagle F1 Aysmmetrics and lots of V-Power! Smiles all 'round

09-11-2007, 21:04	#8
martziniuk Need more power Join Date: Feb 2007 Location: Driffield, Good old yorkshire Posts: 1,613 Thanks: 31 Thanked 108 Times in 108 Posts	Re: The old hesitation after remap problem cheers buddy __________________ Regards Martin Turbo back blueflame exhaust ,Forge FMDV006 Dump valve, Autobahn88 TIP, CAI ,Remapped, FMIC soon..... SCN rolling road day 216.8bhp 264ft/lb (Dyno Dynamics)

09-11-2007, 21:22	#9
Big__Lad Briskodian Join Date: Aug 2007 Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts	Re: The old hesitation after remap problem Yes check you DV and replace e.g forge 007P. something i have on mines

09-11-2007, 22:47	#11
martziniuk Need more power Join Date: Feb 2007 Location: Driffield, Good old yorkshire Posts: 1,613 Thanks: 31 Thanked 108 Times in 108 Posts	Re: The old hesitation after remap problem What would you hint at the issue being mr superted? __________________ Regards Martin Turbo back blueflame exhaust ,Forge FMDV006 Dump valve, Autobahn88 TIP, CAI ,Remapped, FMIC soon..... SCN rolling road day 216.8bhp 264ft/lb (Dyno Dynamics)

09-11-2007, 23:38	#12
bengie splash!!!! Join Date: Feb 2004 Location: planet earth Posts: 14,673 Thanks: 15 Thanked 115 Times in 103 Posts	Re: The old hesitation after remap problem er, its lag. __________________ owner of a skoda octavia 4xvrs3

09-11-2007, 23:54	#13
martziniuk Need more power Join Date: Feb 2007 Location: Driffield, Good old yorkshire Posts: 1,613 Thanks: 31 Thanked 108 Times in 108 Posts	Re: The old hesitation after remap problem I don't think its turbo lag, because it accelerates, then slows, then goes again, almost as if it thinks i'm going to boot it, then decides i didn't want to after all. isn't Turbo lag the time spent waiting for the turbo to spool up after you boot it? __________________ Regards Martin Turbo back blueflame exhaust ,Forge FMDV006 Dump valve, Autobahn88 TIP, CAI ,Remapped, FMIC soon..... SCN rolling road day 216.8bhp 264ft/lb (Dyno Dynamics)

10-11-2007, 00:26	#14
bengie splash!!!! Join Date: Feb 2004 Location: planet earth Posts: 14,673 Thanks: 15 Thanked 115 Times in 103 Posts	Re: The old hesitation after remap problem thats what i thought you were talking about. __________________ owner of a skoda octavia 4xvrs3

10-11-2007, 00:30	#15
martziniuk Need more power Join Date: Feb 2007 Location: Driffield, Good old yorkshire Posts: 1,613 Thanks: 31 Thanked 108 Times in 108 Posts	Re: The old hesitation after remap problem Having searched and searched i think the general idea is you need to replace the standard Dv with an uprated one to cope with the excess pressure. Many mapping companies seem to recommend replacing the DV when you have the car remapped too as the standard cannot cope with the extra turbo pressure. Would it sound right that the old standard diaphragm Dv i have maybe fluttering/struggling a bit when i change gear causing the hesitation/surge? __________________ Regards Martin Turbo back blueflame exhaust ,Forge FMDV006 Dump valve, Autobahn88 TIP, CAI ,Remapped, FMIC soon..... SCN rolling road day 216.8bhp 264ft/lb (Dyno Dynamics)

10-11-2007, 09:05	#17
musky Briskodian Join Date: Jan 2006 Posts: 473 Thanks: 10 Thanked 8 Times in 7 Posts	Re: The old hesitation after remap problem I thought the hesitating thing was a before remap thing not after, it cured mine when it was done. And nothing else was replaced.

10-11-2007, 10:13	#18
christaylor Briskodian Join Date: Sep 2006 Location: York Posts: 72 Thanks: 0 Thanked 1 Time in 1 Post	Re: The old hesitation after remap problem I have this same problem with my car and am not sure what it is. Mine isn't remapped though. It happens mainly in second gear say I put my foot down from 40 - 70 mph the turbo kicks in then seems to backs off about 2-3 times it all happens very quickly __________________ Octavia vRS Mk1 55 Plate Corrida Red Blueflame turbo back exhaust 100 cell cat, Carbonio C.A.I, Forge T.I.P, Forge Diverter Valve, Toyo Proxes and remap soon to come

10-11-2007, 11:57	#19
dewaryboy Briskodian Join Date: Apr 2006 Location: fife Posts: 35 Thanks: 0 Thanked 2 Times in 2 Posts	Re: The old hesitation after remap problem i had the same fault after my octy vrs was remapped,i already had an uprated dv on mine,i have done away with my n249 valve,its still connected electrically to keep ecu happy,but i have re routed vacum pipes to bypass,its not cured the hesistation completely but its loads better,plus the dv reacts a lot quicker,people will tell u not to bypass it,with the n249 in place the ecu has the option if it senses too much boost to open the dv will on throttle,but it can cause the problems ur having.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode