Tyre pressure warning

Garethgrg · 12-12-2007, 13:48

The light is on my dashboard for the tyre pressure . . .have had 2 new tyres fitted since the light coming on . .it's still on!!

All 4 tyres have the correct PSI.

And what's the "SET" button for under the heating controls. .. .this makes the tyre pressure light blink . . . . any ideas guys??

Cheers

Gareth

VRS Jon · 12-12-2007, 14:01

Hi Gareth,

I'm sure someone will correct me if I'm wrong but after changing wheels, tyre pressure etc.etc. the computer needs to be reset. If the tyres have the correct PSI, press and hold the tyre pressure button (the SET one) for a couple of seconds which will reset it - the light will then go out. Obviously it will pop back on then when the tyre pressure decreases. Hope this helps.
Cheers
Jon

FocusZtec · 12-12-2007, 14:02

Press the button and hold it and it should note the current pressures (make sure they are correct first!)

Then a deviation from this pressure should bring up the warning. Mine works very effectively.

Lee

12-12-2007, 13:48	#1
Garethgrg Briskodian Join Date: Nov 2005 Location: scotland and wales Posts: 6 Thanks: 0 Thanked 0 Times in 0 Posts	Tyre pressure warning The light is on my dashboard for the tyre pressure . . .have had 2 new tyres fitted since the light coming on . .it's still on!! All 4 tyres have the correct PSI. And what's the "SET" button for under the heating controls. .. .this makes the tyre pressure light blink . . . . any ideas guys?? Cheers Gareth

12-12-2007, 14:01	#2
VRS Jon Briskodian Join Date: Aug 2007 Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Tyre pressure warning Hi Gareth, I'm sure someone will correct me if I'm wrong but after changing wheels, tyre pressure etc.etc. the computer needs to be reset. If the tyres have the correct PSI, press and hold the tyre pressure button (the SET one) for a couple of seconds which will reset it - the light will then go out. Obviously it will pop back on then when the tyre pressure decreases. Hope this helps. Cheers Jon

12-12-2007, 14:02	#3
FocusZtec Briskodian Join Date: Aug 2005 Location: North London Posts: 768 Thanks: 21 Thanked 24 Times in 21 Posts	Re: Tyre pressure warning Press the button and hold it and it should note the current pressures (make sure they are correct first!) Then a deviation from this pressure should bring up the warning. Mine works very effectively. Lee __________________ Thanks to JKM: REVO STAGE 2+ remap, Evoms CAI, Piper Turbo back Exhaust, Autotech Fuel Pump, Torque Arm Insert, Forge Recirc, Neuspeed Turbo & Intercooler pipes, APR FMIC, Iridium plugs, Koni FSD's, Eibach springs, Eibach F + R anti roll bars. VF short shifter. 345mm Brakes. 280BHP & 330LB/FT - enough room for a proper trip to B&Q and 36mpg on a run!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode