Favirit injection
This is a discussion on Favirit injection within the RWD Skodas and others forums, part of the Skoda Model Discussion Area category; Hi guys,, skodas misfiring on throttle and steady high revs,, If this was my bike Ide say it was the ...
| |||||||
Pronounced "bris-skoda", a brisk skoda. | Register | FAQ | Members List | Calendar | Mark Forums Read |
08-03-2008, 14:57
| #1 |
| Briskodian Join Date: Mar 2008 Location: sheffield
Posts: 7
|  Favirit injection Hi guys,, skodas misfiring on throttle and steady high revs,, If this was my bike Ide say it was the main jet..Ive got new plugs dist cap,rotor , leads, was fine last week got a bit rough now really bad.. tried dismantling the carb? (bosch injector) cant see how to get to main jet ,, is that it upside down under the diaphram?,, how do I split the carb body.. all these questions.. help? |
|    |
|
08-03-2008, 18:56
| #2 |
| Briskodian  Join Date: Jan 2007 Location: Leeds
Posts: 1,981
| Re: Favirit injection The Haynes manual describes how to take the injector out. I would try with the simple stuff first, remove and re-seat all leads and cap and arm and spray some WD40 around. Apparently it is the one torx screw at the back that holds the injector. Electrical resistance should be under 3 ohms at 15 to 30 degrees C. Apparently all seals and o rings should be renewed on replacement with a sealant on the screw thread.
__________________  <-- clickable for loads of boring info  94 Favorit GLXIe Estate (saved from scrap) - 101k miles (replaced clock - actual 120k+) |
|
| |
 |
« 136 engine...
|
Favorit 92 »
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
All times are GMT +1. The time now is 09:18.
