Door-protectors problem FIX

Hey,

When getting out of the car in the garage I snagged the door protector with my jacket a bit. Eversince the door refused to fully close, had to slam it shut. Upon examination i have noticed that there is a wider (about a milimeter wider) gap between the metal mechanism and the removable plastic door protector on the door that refuses to close than on the other doors that close normaly. I have fixed the problem without removing the door protectors with this technique:

- open the door a bit, just enought to gain access, but not enough for the door protectors to fully deploy

- use a small screw-driver or a regular key and put it into the little hole of the metal part of the door protector (there are two holes verticaly alligned), but be careful and put a rag or your finger between the screwdriver/key and the door so you don't scratch the door paint

- push on the plastic door protector in the direction of the metal mechanism until you hear a "click"

- now you can close the door normaly

If the problem returns, put a drop (only a drop!, if you put more you will have trouble removing them in the future if you decide to do so) of super-glue between the metal mechanism and plastic door protector before pushing on the door protectors.

This has solved my problem.