Enabling auto-lock feature on Fabia 3

[penguin17]

I'd like to enable the auto-lock (anti-hijack) feature on my wifes Fabia 3, SE L MY15.   

 

I've tried:

=====

Locking Door up to 15 km/h
Select Control unit 09 (Central Electrics)
Control unit Long Coding 
Byte 0
Bit 4 Activate
=====

 

The coding was accepted but the doors aren't locking when I'm driving up to 30mph.   Any ideas?

[Rustynuts]

Where did you get the instructions from for doing the above? It looks rather like an old coding instruction from many moons ago.

[penguin17]

On 24/08/2019 at 17:41, Rustynuts said:

Where did you get the instructions from for doing the above? It looks rather like an old coding instruction from many moons ago.

I found it on the Fabia 3 board, which links to an OBDEleven forum post. 

 

Do you know of any more up to date instructions to enable this?  It must be doable as other Fabia 3 owners have reported it being successfully completed by their dealers.  Perhaps it needs ODIS (?)

[Tech1e]

Don’t you just hold the interior lock button down for 20 seconds? Works on the Fabia 2. 

[Rustynuts]

Maybe asking the OBDEleven deveolpers why their instructions are wrong. Byte 0 Bit 4 isn't a selectable option on VCDS for anything, at least not on my vehicles.

I'm unwilling to give you a "best guess" as to which Bytes & Bits you should select, as I'm not a fan of randomly clicking here and there in the hope of landing on the right choice. But lets just say VCDS has a correct coding selection in their long coding helper. Whether your vehicle is the same as mine I'm not certain.

[wirer]

my notes:

 

Access control-automatisches Entriegeln change to active

Access control-automatisches Verriegeln bei Geschwindigkeit change to active

for infotainment (Swing and high)

Access control-Menuesteuerung ZV Autolock-Unlock change to adjustable

 

then go to infotainment and check in door menu "auto lock"

[penguin17]

16 hours ago, wirer said:

my notes:

 

Access control-automatisches Entriegeln change to active

Access control-automatisches Verriegeln bei Geschwindigkeit change to active

for infotainment (Swing and high)

Access control-Menuesteuerung ZV Autolock-Unlock change to adjustable

 

then go to infotainment and check in door menu "auto lock"

Thanks. Do you know the access code for this module, please? 

[wirer]

31347

[penguin17]

16 minutes ago, wirer said:

31347

Perfect.  Much appreciated. 

 

Access code worked a treat as did your instructions above.  Now visible via infotainment and doors looking at 15KPH.  Many thanks