Unused Czech Skoda numberplates surrounds

streety · 09-07-2008, 20:05

PM sent, I'm in for some too

Kiss_my_VRS · 10-07-2008, 03:40

Hi Petr

Would love a set of these if I'm not too late , please PM me if still available.

Thanks James

the13thduke · 10-07-2008, 13:34

Another prospective buyer here, let me know if you can supply these.

Thanks

Diesel · 11-07-2008, 10:11

I'm going to Prague in a couple of weeks and would be interested in getting some of these.

Are they the sort of thing that you can just rock up to a dealers parts desk and buy?

johnny2cards · 25-07-2008, 22:29

same here if you get anymore ta???

phat28VRS · 29-07-2008, 21:51

wouldnt mind a set of these also. PM me plz

octimark · 30-07-2008, 10:04

Quote:

Originally Posted by Diesel

I'm going to Prague in a couple of weeks and would be interested in getting some of these.

Are they the sort of thing that you can just rock up to a dealers parts desk and buy?

To be honest mate at the price Petr can supply them its not worth the hassle of trying to buy them in Czech.

Belive me it's hard enough to get hold of things even when you speak Czech, you have little to no chance of getting what you want if you dont speak Czech.

You can try and buy them but I doubt the dealers will have the actual Skoda factory ones in stock, they will most likely be "Ceska Republika" surrounds. Good luck if you do contact a dealer. Post how you get on.

anewman · 30-07-2008, 10:17

Jorily has the Ceska Republika one's here Skoda Czech Republic Number Plate Holder - £6.99 : Skoda Parts, Jorily, The Skoda Parts Shop - Probably the UKs largest independent skoda parts supplier

I prefer Petr's myself. Matter of personal preference though I'm sure

kmc · 05-08-2008, 12:52

Hi there. I like the look of the plates that Petr did. Will anymore be available? Cheers.

Petr · 29-08-2008, 08:04

I still have some left if people are interested.

sunny76 · 30-08-2008, 09:12

Hi Petr, just a quick question, how well would these fit at the front, I only ask because of the plastic surround on the front bumper is pretty much the same size as the number plate already. They are nice surrounds though, and I'd be very interested.
Thanks,
Sunny

WaveyDavey · 30-08-2008, 12:57

I'll have a couple please Petr.

Cheers

Dave.

anewman · 31-08-2008, 20:40

Quote:

Originally Posted by sunny76

Hi Petr, just a quick question, how well would these fit at the front, I only ask because of the plastic surround on the front bumper is pretty much the same size as the number plate already. They are nice surrounds though, and I'd be very interested.
Thanks,
Sunny

The bit at the bottom bit is raised from the front by a few mm.

WaveyDavey · 31-08-2008, 21:44

Thanks for meeting up today Petr. It saved me a couple of quid postage.

Mrs WaveyDavey has decided they are going on her car so i'll hopefully fit them tomorrow after i've washed her car.

Thanks again.

Cheers

Dave.

Petr · 01-09-2008, 08:20

Glad you like them Dave, maybe one day there will be chance to have a drink and chat. So far I have not managed any Yorkshire/Sheffield meets.

cheers

Petr

Quote:

Originally Posted by WaveyDavey

Thanks for meeting up today Petr. It saved me a couple of quid postage.

Mrs WaveyDavey has decided they are going on her car so i'll hopefully fit them tomorrow after i've washed her car.

Thanks again.

Cheers

Dave.

WaveyDavey · 01-09-2008, 14:29

NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO!!!!!

Just gone to pop them on the mrs car and am unable to do so..... Looks like the original dealer decided in their wisdom to use the cheapest nastiest screws available and after just three years one on the back is rusted solid. (Although if using a socket set and screwdriver bit it might just might move). And on the front one of the three screws is so corroded that the screw head just disintegrated as i took the plastic cap off the top of it!!!!!

I would have thought it wasn't rocket science to use some good quality screws in a situation like this as they're not exactly protected from the elements!!!!!

Ok Rant over.

****EDIT****
I've managed to remove the front screw by removing the plastic cap which then gave more room to get hold of the screw with pliers and remove that way. So the front surround is now on.

The rear screw is stuck fast. It doesn't help that when they've fitted the plate they haven't bothered to use caps to cover the screws so i can't even do what i did on the front and remove the cap to get more leverage with pliers. I've even tried a socket set with screw driver bit and it moved very slightly but the screw head is too damaged and the screwdriver head just moves round the screw head.

Think the only way would be to drill it out. Not something i have any clue how to do so anybody in the Sheffield area want to volunteer or give advice???

Cheers

Dave.

kmc · 01-09-2008, 20:47

Hi Dave,

I don't know how much of the screw head is left but I had a similar situation recently on my shower! The screw head was badly rusted up so that a screwdriver (crosshead) didn't work and it was in a location that didn't allow me to get a pair of pliers on it.
What I managed to do was to use a flat profile needle file and used the edge to file a slot into the screw head which then enabled me to use a slotted screwdriver. If you don't have a set of needle files, a junior hacksaw will probably do the same job - although a needle file can get in easier.

Hope this may prove useful.

Quote:

Originally Posted by WaveyDavey

NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO!!!!!

Just gone to pop them on the mrs car and am unable to do so..... Looks like the original dealer decided in their wisdom to use the cheapest nastiest screws available and after just three years one on the back is rusted solid. (Although if using a socket set and screwdriver bit it might just might move). And on the front one of the three screws is so corroded that the screw head just disintegrated as i took the plastic cap off the top of it!!!!!

I would have thought it wasn't rocket science to use some good quality screws in a situation like this as they're not exactly protected from the elements!!!!!

Ok Rant over.

****EDIT****
I've managed to remove the front screw by removing the plastic cap which then gave more room to get hold of the screw with pliers and remove that way. So the front surround is now on.

The rear screw is stuck fast. It doesn't help that when they've fitted the plate they haven't bothered to use caps to cover the screws so i can't even do what i did on the front and remove the cap to get more leverage with pliers. I've even tried a socket set with screw driver bit and it moved very slightly but the screw head is too damaged and the screwdriver head just moves round the screw head.

Think the only way would be to drill it out. Not something i have any clue how to do so anybody in the Sheffield area want to volunteer or give advice???

Cheers

Dave.

cjb · 01-09-2008, 20:50

Get a dremel with a cutting wheel and cut a new slot in.

octimark · 02-09-2008, 08:01

Quote:

Originally Posted by WaveyDavey

Think the only way would be to drill it out. Not something i have any clue how to do so anybody in the Sheffield area want to volunteer or give advice???

Cheers

Dave.

Hello fella,

I had the same problem when fitting them to my Octi.

I used a Dremel to cut a new head into the screw but it was so bad that when I used the slightest amount of pressure it snapped off leaving half the screw behind.

The only thing you can do is drill it out. Its hard to do due to the location and trying not to damage the car. It just takes some time and a few cups of tea

.

Happy to help if you get stuck. Just PM me when you have some time and we can arrange something. Pop down to my work where ive got all the tools we will need.

I feel for you mate, I know what a PITA it is.

Cheers
Mark

WaveyDavey · 02-09-2008, 12:15

Quote:

Originally Posted by octimark

Hello fella,

I had the same problem when fitting them to my Octi.

I used a Dremel to cut a new head into the screw but it was so bad that when I used the slightest amount of pressure it snapped off leaving half the screw behind.

The only thing you can do is drill it out. Its hard to do due to the location and trying not to damage the car. It just takes some time and a few cups of tea

.

Happy to help if you get stuck. Just PM me when you have some time and we can arrange something. Pop down to my work where ive got all the tools we will need.

I feel for you mate, I know what a PITA it is.

Cheers
Mark

Cheers Mark..... I'm gonna give the dremel a go and will give you a shout if need be.

I'll let you guys know how i get on.

Cheers

Dave.

WaveyDavey · 02-09-2008, 16:24

VICTORY!!!!!!!

Managed to crack it just now.

I dremmeled a slot across the top of the bolt so as to make it a bladed screwdriver bolt etc... as mentioned above. Then managed to get the bolt unscrewed using a socket and big bladed bit. Tried the bolt in the other thread and it went in fine so was obviously the thread inside the nut etc... that was knackered. Then as the bolt head was working fine as a bladed head decided to dremmel off 2 to 3 mm off the end of the bolt so that it screwed right in but didn't get to the knackered part of the thread and jobs a good 'un.

Gonna have to get a couple of new plates so as to get the smoooooth look especially as the rear plate is clipped in and just has two holes in it where the bolts used to go but that's something that can be done some time soon.

Thanks again for all the help..... Brisky members get the job done yet again.

Cheers

Dave.

Adamhodg · 02-09-2008, 21:57

Got these today
Cheers mate!

09-07-2008, 20:05	#26
streety Briskodian Join Date: Nov 2007 Location: Staffs UK Posts: 68 Thanks: 28 Thanked 5 Times in 5 Posts	Re: Unused Czech Skoda numberplates surrounds PM sent, I'm in for some too __________________ Cruise ctrl , tow pack, and a funny noise from the passenger seat ( now identified as the missus!! )

10-07-2008, 03:40	#27
Kiss_my_VRS Briskodian Join Date: Apr 2007 Location: Dundee Posts: 173 Thanks: 3 Thanked 3 Times in 3 Posts	Re: Unused Czech Skoda numberplates surrounds Hi Petr Would love a set of these if I'm not too late , please PM me if still available. Thanks James __________________ Just make sure you keep it rubber side down. Mods to date: Polo Twin Cupholder, PD 160 Intake, Pipercross Performance Air Filter, Remap, Private VRS Plate.

10-07-2008, 13:34	#28
the13thduke Briskodian Join Date: Jun 2008 Location: Lancashire Posts: 15 Thanks: 0 Thanked 2 Times in 2 Posts	Re: Unused Czech Skoda numberplates surrounds Another prospective buyer here, let me know if you can supply these. Thanks

11-07-2008, 10:11	#29
Diesel Briskodian Join Date: Jun 2006 Location: South Wales Posts: 58 Thanks: 1 Thanked 1 Time in 1 Post	Re: Unused Czech Skoda numberplates surrounds I'm going to Prague in a couple of weeks and would be interested in getting some of these. Are they the sort of thing that you can just rock up to a dealers parts desk and buy?

25-07-2008, 22:29	#30
johnny2cards Briskodian Join Date: Apr 2007 Location: SWANSEA SOUTH WALES Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Unused Czech Skoda numberplates surrounds same here if you get anymore ta??? __________________ *JOHNNY2CARDS*

29-07-2008, 21:51	#31
phat28VRS Briskodian Join Date: May 2008 Posts: 67 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Unused Czech Skoda numberplates surrounds wouldnt mind a set of these also. PM me plz

30-07-2008, 10:17	#33
anewman Briskodian Join Date: Jan 2007 Location: Leeds Posts: 2,919 Thanks: 1,101 Thanked 254 Times in 229 Posts	Re: Unused Czech Skoda numberplates surrounds Jorily has the Ceska Republika one's here Skoda Czech Republic Number Plate Holder - £6.99 : Skoda Parts, Jorily, The Skoda Parts Shop - Probably the UKs largest independent skoda parts supplier I prefer Petr's myself. Matter of personal preference though I'm sure __________________ 94 Favorit GLXIe Estate Briskoda "Banger" social group

05-08-2008, 12:52	#34
kmc Briskodian Join Date: Dec 2007 Posts: 65 Thanks: 11 Thanked 2 Times in 2 Posts	Re: Unused Czech Skoda numberplates surrounds Hi there. I like the look of the plates that Petr did. Will anymore be available? Cheers.

29-08-2008, 08:04	#35
Petr Briskodian Join Date: Apr 2007 Location: Sheffield & Czech Republic Posts: 188 Thanks: 15 Thanked 11 Times in 9 Posts	Re: Unused Czech Skoda numberplates surrounds I still have some left if people are interested.

30-08-2008, 09:12	#36
sunny76 Briskodian Join Date: Mar 2008 Posts: 9 Thanks: 0 Thanked 1 Time in 1 Post	Re: Unused Czech Skoda numberplates surrounds Hi Petr, just a quick question, how well would these fit at the front, I only ask because of the plastic surround on the front bumper is pretty much the same size as the number plate already. They are nice surrounds though, and I'd be very interested. Thanks, Sunny

30-08-2008, 12:57	#37
WaveyDavey Hiya Vic!!! Join Date: Feb 2006 Location: Sheffield, South Yorkshire Posts: 2,262 Thanks: 112 Thanked 93 Times in 90 Posts	Re: Unused Czech Skoda numberplates surrounds I'll have a couple please Petr. Cheers Dave. __________________ 2006 'Black Magic' Fabia vRS... With a few little EXTRAS

31-08-2008, 21:44	#39
WaveyDavey Hiya Vic!!! Join Date: Feb 2006 Location: Sheffield, South Yorkshire Posts: 2,262 Thanks: 112 Thanked 93 Times in 90 Posts	Re: Unused Czech Skoda numberplates surrounds Thanks for meeting up today Petr. It saved me a couple of quid postage. Mrs WaveyDavey has decided they are going on her car so i'll hopefully fit them tomorrow after i've washed her car. Thanks again. Cheers Dave. __________________ 2006 'Black Magic' Fabia vRS... With a few little EXTRAS

01-09-2008, 14:29	#41
WaveyDavey Hiya Vic!!! Join Date: Feb 2006 Location: Sheffield, South Yorkshire Posts: 2,262 Thanks: 112 Thanked 93 Times in 90 Posts	Re: Unused Czech Skoda numberplates surrounds NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO!!!!! Just gone to pop them on the mrs car and am unable to do so..... Looks like the original dealer decided in their wisdom to use the cheapest nastiest screws available and after just three years one on the back is rusted solid. (Although if using a socket set and screwdriver bit it might just might move). And on the front one of the three screws is so corroded that the screw head just disintegrated as i took the plastic cap off the top of it!!!!! I would have thought it wasn't rocket science to use some good quality screws in a situation like this as they're not exactly protected from the elements!!!!! Ok Rant over. **EDIT I've managed to remove the front screw by removing the plastic cap which then gave more room to get hold of the screw with pliers and remove that way. So the front surround is now on. The rear screw is stuck fast. It doesn't help that when they've fitted the plate they haven't bothered to use caps to cover the screws so i can't even do what i did on the front and remove the cap to get more leverage with pliers. I've even tried a socket set with screw driver bit and it moved very slightly but the screw head is too damaged and the screwdriver head just moves round the screw head. Think the only way would be to drill it out. Not something i have any clue how to do so anybody in the Sheffield area want to volunteer or give advice??? Cheers Dave. __________________ 2006 'Black Magic' Fabia vRS... With a few little EXTRAS** Last edited by WaveyDavey; 01-09-2008 at 16:02.

01-09-2008, 20:50	#43
cjb Briskodian Join Date: Sep 2006 Location: Walsall Posts: 1,714 Thanks: 105 Thanked 111 Times in 107 Posts	Re: Unused Czech Skoda numberplates surrounds Get a dremel with a cutting wheel and cut a new slot in. __________________ -- Chris ---------------------------------------------------- The Devil may care, but I don't mind.

02-09-2008, 16:24	#46
WaveyDavey Hiya Vic!!! Join Date: Feb 2006 Location: Sheffield, South Yorkshire Posts: 2,262 Thanks: 112 Thanked 93 Times in 90 Posts	Re: Unused Czech Skoda numberplates surrounds VICTORY!!!!!!! Managed to crack it just now. I dremmeled a slot across the top of the bolt so as to make it a bladed screwdriver bolt etc... as mentioned above. Then managed to get the bolt unscrewed using a socket and big bladed bit. Tried the bolt in the other thread and it went in fine so was obviously the thread inside the nut etc... that was knackered. Then as the bolt head was working fine as a bladed head decided to dremmel off 2 to 3 mm off the end of the bolt so that it screwed right in but didn't get to the knackered part of the thread and jobs a good 'un. Gonna have to get a couple of new plates so as to get the smoooooth look especially as the rear plate is clipped in and just has two holes in it where the bolts used to go but that's something that can be done some time soon. Thanks again for all the help..... Brisky members get the job done yet again. Cheers Dave. __________________ 2006 'Black Magic' Fabia vRS... With a few little EXTRAS

02-09-2008, 21:57	#47
Adamhodg Briskodian Join Date: Nov 2007 Location: Midlands Posts: 76 Thanks: 5 Thanked 4 Times in 4 Posts	Re: Unused Czech Skoda numberplates surrounds Got these today Cheers mate!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Skoda / Czech style number plate surrounds (ALL GONE)	Quinten	Group Buys and Promotions	35	03-03-2007 23:37
Skoda / Czech style number plate surrounds	Quinten	Group Buys and Promotions	120	25-01-2007 09:59

Unused Czech Skoda numberplates surrounds

Unused Czech Skoda numberplates surrounds

Similar Threads