Mikalor Clamps for a Jabba ARB

[wilsonian]

Does anyone know the size of the Mikalor Clamps that are provided with the Jabba ARB? Tried fitting one tonight and the threads on the bots were too badly rusted up get the nuts on.

[JLneonhug]

Normal M8x50mm IIRC?

Double check at B&Q or something, I used the marine grade bolts/nuts so they wont rust in the future..

Edited 22 September, 2010 by JLneonhug

[wilsonian]

OK slightly silly question but is the 8mm the thickness and the 50mm the diameter? I've measured the ones I have and their 24mm wide and cause their no longer round I had to measure the length which came in at around 300mm

[Buzzark]

M8x50mm is a bolt size. M8 (8mm Metric thread) x 50mm (length of bolt)

Hope that helps.

[wilsonian]

well I called up Jabba and they sell them individually so I've ordered two of these. Fingers crossed I can get them soon and finally get it fitted

Edited 23 September, 2010 by wilsonian